Orange County NY Roofing: Article About The Importance Of Insulation
Insulation is important to the comfort of your home at all times of the year. When the insulation in your attic gets wet, it loses its ability to prevent heat from leaving the home. The warm, moist air in the attic can allow mold and mildew to form. If it stays wet for more than a few days, the wood sheathing and supporting roof structure of the house can start to rot. If you suspect that you have a moisture problem in your attic, experienced Orange County NY roofing professionals can help you fix the issue.
Condensation forms in the attic in a few different ways. If insulation is not properly installed or it has become wet, warm air from the living areas of the home can escape into the attic. When the warm air in the attic meets the cold underside of the roof, condensation can form. If bathroom and kitchen fans are vented into the attic instead of directly outside the home, a great deal of moisture is allowed in the attic where it could cause condensation and damage the insulation. You should check the wood decking in the attic for any signs of moisture. They would be visible by a water stain. A small stain would indicate the possibility of a leak in the roof while a stain that covers a large area would indicate the presence of moisture in the attic. If you see any water marks on the wood, contact a professional roofer immediately.
The roofing experts at Precision roofing of Orange County NY can assist you with any questions regarding metal roofing or slate roofing.
There are indicators that the insulation in the attic may need replacing. If you spot ice or water droplets on the sheathing in the winter or there is a large buildup of ice on the roof, you should call an expert roofer. If the roof has suffered a leak, the insulation has likely gotten wet. It should be checked by a professional to ensure that it is still functioning properly.
Having a well-insulated roof also plays an important role in reducing the amount of energy the household consumes for heating and cooling. Insulation is measured by the R-value of the material, which indicates its ability to resist heat traveling through it. The higher the R-value, the greater the capacity of the insulating material. A higher R-value is required in colder climates to keep warm air inside the home during the cold winter months. It is easiest to install insulation when a new home is built, but it is also easy to install new insulation in your attic when your roof is being replaced.
Attics are usually easily accessible from the home, making them relatively straightforward to insulate. Make sure you check your local area for the recommended R-value of the insulation appropriate for the climate. The access area for the attic, including pull-down stairs, a hatch or a knee-wall door, should be insulated to keep warm air inside the living areas. If it is left unsealed, it will allow heat loss in the winter and heat gain in the summer. Sealing this gap will reduce heating and cooling costs and help prevent moisture from forming in the attic.